null Skip to main content

Metallic Shades

(17 reviews) Write a Review

1kg spools. High precision filament formulated with our strict demands for printability and strength. 1.75mm diameter, .02mm or better tolerances, vivid colors, and low moisture absorption. We like to print at 225c with the bed at 60c and extrusion multiplier of 115%. 

17 Reviews Hide Reviews Show Reviews

  • 3
    Trophy Gokd

    Posted by Joe on Aug 23rd 2020

    Having used their regular PLA and PETG I was eager to give their metallics a try. While it prints well layer adhesion is not great and breaks rather easily at the seams. I have dried it and the problem still exists. Also have a new roll of bronze that experienced the same issue. While I would highly recommend the regular PLA and PETG I can't recommend the metallic line

  • 5
    Outstanding filament

    Posted by Ken G. on Jul 25th 2020

    The dimensional accuracy is terrific, machine doesn't clog, colors are really nice and the selection continues to expand. This has become my go to PLA.

  • 5

    Posted by Robert Miller on Jul 19th 2020

    McMaster 3D filament is some of the best I've used. Plus you can't beat the price. It's a lot of bang for the buck.

  • 5
    Brass PLA Filament

    Posted by Benjamin M. Brigance on Apr 30th 2020

    Stuff is great, flows without clogs. Is actually very shiny similiar to Silk.

  • 5
    Gold metallic pla

    Posted by Paul Kircher on Apr 28th 2020

    Gotta say this is up there with some of the more expensive filament I have use and way cheaper. Also Paul is about the nicest guy around if you go in person to pick the stuff up. I'd never even met the man before and he bent over backwards to get me a heater element for my printer on an hour notice. Never buying filament from anywhere else again.